In this episode, we will be discussing the realities of cutting a thick (at least thick for the 3040 CNC see more here: http://diy3dtech.com/purchase-3040-cnc-router/ ) piece of 10mm aluminum. It seems the third time was the charm and my first success with using the CAM module of Fusion 360!
Couple CAM/Cut Notes:
1. I used YTF 6mm shank / 3mm x 10mm 2 flute cutter HSS endmill for all of these options
2. I found the Boring strategy to be better to create a recess then the pocketing
3. For boring I used 0.5mm cut depth at 250mm/min
4. For the 2D Contour (cut out) I used 0.25mm cut depth at 250mm/min with step of 6mm/sec (too slow)
5. I used https://amzn.to/2I5zALU cut with some water as lubricant / coolant.
Also if you looking for a crazy affordable 5 Axis (yes you read that correctly) CNC, then check these out: http://diy3dtech.com/affordable-5-axis-3040-cnc/
One of the handiest tools as a maker I have is the CO2 laser as they are VERY affordable, check these out for yourself: http://diy3dtech.com/purchase-laser/
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
source
Comments are closed.