Direct link to product:
https://www.richelieu.com/qr/MAK03023 (USA)
https://www.richelieu.com/qr/MAK03024 (CAN)
The Portable Edgebander is designed for convenience, portability and affordability. It features a hot melt glue applicator for use on PVC, ABS, paper and wood veneer edgebanding that is not pre-glued.
Maximum edgebanding thickness of 3 mm and width of up to 3″.
Features digital temperature control (adjustable from 120° to 220°C) and an electronic speed regulator.
The required glue works in the range of 150°C to 180°C.
The glue pot has a capacity of 1.5 lb, comes with 1.5 lb of glue and heats in 15 minutes.
Technical information:
Tape thickness: 0.3 mm to 2 mm (1/64″ to 5/16″)
Max. tape width: 3″
Feeder speed: 18 ft/min
Power: 1.300 Watts
Motor: 1 Phase
Volts/amps: 127 V – 5,9 A | 220 V – 10,2 A
ADVANTAGES AND BENEFITS
– Easy and fast setup
– Precise cutting of the tape with its integrated manual cutter
– Tape support for the tape roll
– Inner guide to help align the workpiece before the glue spindle
– Tape guide to ensure the alignment of the tape and the workpiece
– Rubber spindle guides the tape onto the workpiece at a set speed
– Back rolls provide pressure points that help the bonding of the glue and the edgebanding tape
– Table guide to help move the workpiece easily over the table
– Retractable legs make it portable
– Can fit in a standard car trunk for easy transportation
***
Direct link to product: https://www.richelieu.com/qr/MAK238396
The Edge Trimmer Machine trims and scrapes edgebanding applied to MDF and similar substrate material, providing a perfect finish.
Suitable for ABS edges, PVC and others.
Comes with a versatile mounting system that adapts to any kind of bench.
ADVANTAGES AND BENEFITS
– Portable
– Easy to install and operate
– Helps you ensure perfect finishing in your projects
IMPORTANT INFORMATION
Technical information:
Max. workpiece height: 2 3/8″
Table length: 39″
Table width: 6″ to 16″
Trimmer speed: 32,000 RPM
Power: 500 W
Volts/amps: 127 V – 4.3 A | 220 V – 2.5 A
https://www.richelieu.com
source