Cutting simulated MDF Shaker Style Doors on the Stepcraft Q.408 CNC machine using the AMS-262 all linked below. To clear the majority of the waste I used the RC-2254 1-1/4″ diameter insert carbide surfacing bit.
– – – – – – –
RPM: 18,000
Feed Rate: 150ipm
Plunge Rate: 75ipm
Stepover: 70%
Depth per pass: .2″
– – – – – – –
I then switched out for the 46200-K 1/8″ Spektra™ coated downcut bit to clean up the edges.
– – – – – – –
RPM: 18,000
Feed Rate: 60ipm
Plunge Rate: 30ipm
Depth per pass: .125″
– – – – – – –
I then switched out for the RC-1108 60 degree insert carbide v-bit to create a chamfer and sharp inside edges.
– – – – – – –
RPM: 18,000
Feed Rate: 60ipm
Plunge Rate: 30ipm
– – – – – – –
#short #shorts
Tools Used:
Vectric Software for CNC https://www.toolstoday.com/everything-cnc/cnc-software.html
STEPCRAFT Q.408 63 x 108 COMPLETE SYSTEM CNC MACHINE
https://www.toolstoday.com/stepcraft-q-408-63-x-108-complete-system-cnc-machine.html
Amana Tool AMS-262 4-Pc CNC Simulated MDF Shaker Door Router Bit Set, Solid and Insert Carbide, 1/4 and 1/2 Inch Shank
https://www.toolstoday.com/v-17849-ams-262.html
** Subscribe – https://www.youtube.com/user/toolstoday
** Shop the website – http://www.toolstoday.com
source
Comments are closed.