Riselaser Laser Marking Machine. This is a user guide for you to operate CO2 laser marking machine.
1.Replace the field lens
When using different field lenses
Remember to open the corresponding entry with preset parameters
2.Adjust the galvanometer
Manually rotate up and down to adjust the height of the galvanometer.
When using a 100×100 field lens, the distance between the field lens and the marking surface is about 150mm;
when using a 200×200 field lens, the focal length is 300mm.
3. Set the rotating marking parameters
Plug in the connecting cable. Clamp the workpiece.
Create a new file or open a saved file
We try to mark some words, enter the text, set the text length and width, and click ‘Apply’.
You can change the laser power, frequency and speed values
Please select ‘SplitMark’ to mark a vector image. Choose ‘Ringtextmark’ for marking rings.
Try different options and find the one that suits your product.
Measure the diameter of the round workpiece, click F3, and fill in ‘diameter’
Click F3 to change the length of Y or Z axis, you can click ‘invert’ to switch the text direction.
Click F1 to preview the marking area, click F2 to start marking.
source
Comments are closed.