Perfect Laser (www.perfectlaser.net)
Email: [email protected]
SKYPE: chinaperfectlaser
Tel :0086-27-86791986
Introduction
The laser etching machine PEDB 400D for metal adopts international most advanced technology and the fiber laser source’s lifetime can reach 100,000 hours, 8-10 years without any consumables and maintenance.
This laser etching machine for metal with PC for metal is the best choice for the customers who have special requirements to the smallest & finest laser beam and character. The software has already been installed and the parameter is settled before delivery. Once recieved, the laser etcher could work directly without data adjustment.
Product Features
1.Best Marking Effect: the laser beam of fiber laser etching machine for metal is fine and thin. Laser etching steel can provide the best marking effect among all the laser machines. Especially good at smallest character marking, such as mark on IC chip.
2.Deep Marking: Perfect Laser fiber laser etching machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3.Higher Accuracy: The laser etching machine for metal can reach unto 0.001mm precision, while diode only 0.01mm.
4.10 Years Long lifetime: fiber laser etching machine use the fiber laser source made by Germany IPG technology, the lifetime can reach 100,000 hours, so the machine can be used for 8-10 years.
5. No consumables:The laser etching machine for metal can be used for metal marking for 8-10 years without any consumables.
6.No need to adjust the laser path.
7.Free of Maintenance.
8.Use Integrated Air Cooling.
9.Low Power Consumption: low cost, only 0.5kw/hour.
10. Small and compact: the volume of Perfect Laser’s fiber laser marking machine is small, only 0.15 M3.
If you need more information about Fiber Laser Marking Machine on Stainless Steel ,pls visit our website：http://www.perfectlaser.net/fiber-mark/fiber-laser-etcher.html
source
Comments are closed.